Sterling 77301100-0 Guía de instalación descargar pdf (Pagina 7)

Troubleshooting (cont.)

Symptoms Probable Causes Recommended Action

3. Within 4 seconds of step 2, depress

the air switch button twice.

4. Blower will conﬁrm speed proﬁle

change by turning on for 1 second,

off for 2 seconds, then back on for 1

second.

Repeat above steps to return to

original speed proﬁle.

3 All airjets are functioning

but the bubble

concentration is too low

or too high for the user’s

preference.

A. Blower voltage is set too

low/high.

A. Change blower speed proﬁle to

increase air ﬂow:

1. Unplug the blower from the GFCI

outlet.

2. Plug the blower back in.

3. Within 4 seconds of step 2, depress

the air switch button twice.

4. Blower will conﬁrm speed proﬁle

change by turning on for 1 second,

off for 2 seconds, then back on for 1

second.

Repeat above steps to return to

original speed proﬁle.

4. Blower motor stops

suddenly.

A. Circuit for the outlet has tripped. A. Reset the circuit breaker. Check the

wiring. If the problem persists, refer

to your installer or dealer.

B. The blower motor has

overheated and the protection

device has activated. There is

blockage at the suction, airjets,

and/or blower motor vents.

B. Remove the blockage, then allow

the blower motor to cool.

Sterling 7 1139487-5-F

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comentarios a estos manuales

Sin comentarios

Sterling 77301100-0 Guía de instalación Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para No Sterling 77301100-0